#!/usr/bin/env python3
###############################################################################
# $Id$
#
# Project:  GDAL Python samples
# Purpose:  Script to produce a shaded relief image from elevation data
# Author:   Andrey Kiselev, dron@remotesensing.org
#
###############################################################################
# Copyright (c) 2003, Andrey Kiselev <dron@remotesensing.org>
# Copyright (c) 2009, Even Rouault <even dot rouault at spatialys.com>
#
# SPDX-License-Identifier: MIT
###############################################################################

import math
import sys

import numpy as np

from osgeo import gdal, gdal_array

gdal.TermProgress = gdal.TermProgress_nocb


# =============================================================================


def Usage():
    print("Usage: rel.py -lsrcaz azimuth -lsrcel elevation [-elstep step]")
    print("       [-dx xsize] [-dy ysize] [-b band] [-ot type] infile outfile")
    print("Produce a shaded relief image from elevation data")
    print("")
    print(
        "  -lsrcaz azimuth   Azimuth angle of the diffuse light source (0..360 degrees)"
    )
    print(
        "  -lsrcel elevation Elevation angle of the diffuse light source (0..180 degrees)"
    )
    print(
        "  -elstep step      Elevation change corresponding to a change of one grey level"
    )
    print("                    (default 1)")
    print(
        "  -dx xsize         X and Y dimensions (in meters) of one pixel on the ground"
    )
    print("  -dy ysize         (taken from the geotransform matrix by default)")
    print("  -r range	       Dynamic range for output image (default 255)")
    print("  -b band	       Select a band number to convert (default 1)")
    print("  -ot type	       Data type of the output dataset")
    print("                    (Byte/Int16/UInt16/UInt32/Int32/Float32/Float64/")
    print("                     CInt16/CInt32/CFloat32/CFloat64, default is Byte)")
    print("  infile	       Name of the input file")
    print("  outfile	       Name of the output file")
    print("")
    return 2


def ParseType(typ):
    if typ == "Byte":
        return gdal.GDT_Byte
    if typ == "Int16":
        return gdal.GDT_Int16
    if typ == "UInt16":
        return gdal.GDT_UInt16
    if typ == "Int32":
        return gdal.GDT_Int32
    if typ == "UInt32":
        return gdal.GDT_UInt32
    if typ == "Float32":
        return gdal.GDT_Float32
    if typ == "Float64":
        return gdal.GDT_Float64
    if typ == "CInt16":
        return gdal.GDT_CInt16
    if typ == "CInt32":
        return gdal.GDT_CInt32
    if typ == "CFloat32":
        return gdal.GDT_CFloat32
    if typ == "CFloat64":
        return gdal.GDT_CFloat64
    return gdal.GDT_Byte


def main(argv=sys.argv):
    infile = None
    outfile = None
    iBand = 1  # The first band will be converted by default
    driver_name = "GTiff"
    typ = gdal.GDT_Byte

    lsrcaz = None
    lsrcel = None
    elstep = 1.0
    xsize = None
    ysize = None
    dyn_range = 255.0

    # Parse command line arguments.
    i = 1
    while i < len(argv):
        arg = argv[i]

        if arg == "-b":
            i += 1
            iBand = int(argv[i])

        elif arg == "-ot":
            i += 1
            typ = ParseType(argv[i])

        elif arg == "-lsrcaz":
            i += 1
            lsrcaz = float(argv[i])

        elif arg == "-lsrcel":
            i += 1
            lsrcel = float(argv[i])

        elif arg == "-elstep":
            i += 1
            elstep = float(argv[i])

        elif arg == "-dx":
            i += 1
            xsize = float(argv[i])

        elif arg == "-dy":
            i += 1
            ysize = float(argv[i])

        elif arg == "-r":
            i += 1
            dyn_range = float(argv[i])

        elif infile is None:
            infile = arg

        elif outfile is None:
            outfile = arg

        else:
            return Usage()

        i += 1

    if infile is None:
        return Usage()
    if outfile is None:
        return Usage()
    if lsrcaz is None:
        return Usage()
    if lsrcel is None:
        return Usage()

    # translate angles from degrees to radians
    lsrcaz = lsrcaz / 180.0 * math.pi
    lsrcel = lsrcel / 180.0 * math.pi

    lx = -math.sin(lsrcaz) * math.cos(lsrcel)
    ly = math.cos(lsrcaz) * math.cos(lsrcel)
    lz = math.sin(lsrcel)
    lxyz = math.sqrt(lx**2 + ly**2 + lz**2)

    indataset = gdal.Open(infile, gdal.GA_ReadOnly)
    if indataset is None:
        print("Cannot open", infile)
        return 2

    if indataset.RasterXSize < 3 or indataset.RasterYSize < 3:
        print("Input image is too small to process, minimum size is 3x3")
        return 3

    out_driver = gdal.GetDriverByName(driver_name)
    outdataset = out_driver.Create(
        outfile,
        indataset.RasterXSize,
        indataset.RasterYSize,
        indataset.RasterCount,
        typ,
    )
    outband = outdataset.GetRasterBand(1)

    geotransform = indataset.GetGeoTransform()
    projection = indataset.GetProjection()

    if xsize is None:
        xsize = abs(geotransform[1])
    if ysize is None:
        ysize = abs(geotransform[5])

    inband = indataset.GetRasterBand(iBand)
    if inband is None:
        print("Cannot load band", iBand, "from the", infile)
        return 2

    numtype = gdal_array.GDALTypeCodeTonpTypeCode(typ)
    outline = np.empty((1, inband.XSize), numtype)

    prev = inband.ReadAsArray(0, 0, inband.XSize, 1, inband.XSize, 1)[0]
    outband.WriteArray(outline, 0, 0)
    gdal.TermProgress(0.0)

    cur = inband.ReadAsArray(0, 1, inband.XSize, 1, inband.XSize, 1)[0]
    outband.WriteArray(outline, 0, inband.YSize - 1)
    gdal.TermProgress(1.0 / inband.YSize)

    dx = 2 * xsize
    dy = 2 * ysize

    for i in range(1, inband.YSize - 1):
        next_ = inband.ReadAsArray(0, i + 1, inband.XSize, 1, inband.XSize, 1)[0]
        dzx = (cur[0:-2] - cur[2:]) * elstep
        dzy = (prev[1:-1] - next_[1:-1]) * elstep
        nx = -dy * dzx
        ny = dx * dzy
        nz = dx * dy
        nxyz = nx * nx + ny * ny + nz * nz
        nlxyz = nx * lx + ny * ly + nz * lz
        cosine = dyn_range * (nlxyz / (lxyz * np.sqrt(nxyz)))
        cosine = np.clip(cosine, 0.0, dyn_range)
        outline[0, 1:-1] = cosine.astype(numtype)
        outband.WriteArray(outline, 0, i)

        prev = cur
        cur = next_

        # Display progress report on terminal
        gdal.TermProgress(float(i + 1) / (inband.YSize - 1))

    outdataset.SetGeoTransform(geotransform)
    outdataset.SetProjection(projection)

    return 0


if __name__ == "__main__":
    sys.exit(main(sys.argv))
